Products

Insert filter into light to get a 120° beam.

Insert filter into light to get a 120° beam.

Power supply for our neon hearts for the United Kingdom. 12V 12W AC/DC External Wall Mount (Class II) Adapter Fixed Blade Input

12V Battery Holder Holds (8) X AA 1.5V Batteries and outputs 12V DC Output power is via a standard 2.1 X 5.5MM DC Barrel ConnectorFeatures a handy ...

This is a highly responsive RGBW individually controlled pixel product. Each pixel dot can change colour independent of one another. Ideal for inst...

Modify the beam of your light to expand its possibilities.

2 X 23A / A23 Battery Holder 24V Battery Pack Holds (2) 23A 12V Batteries and outputs 24V DC Powers 10 centimeters of FlexLED 24V 14.4 W/Meter (Tun...

A high output RGB+W 1' x 1' panel.  49 X RGB and 98 X 4100k LEDs provide a nice even output for backlighting and downlighting.  This is a rigid pan...

Meet our 3-Inch recessed downlight with Dim-To-Warm technology - a dynamic LED that can dim and adjust from 3200K to 1800K. When at full brightness...

Superior high current DC-rated industry-grade connectors Install connectors on your own cable Field - installable connectors. Can be used with m...

3.5mm Stereo Plug/Plug M/M Cable - Black This is a brand new high quality 3.5mm (1/8" headphone jack size) stereo audio male to male cable....

3.5mm Stereo 1M to 2F Cable - Black This is a brand new high quality 3.5mm (1/8" headphone jack size) stereo audio 1 male to 2 female allows for ju...

Insert filter into light to get a 30° beam.

Insert filter into light to get a 30° beam.

Modify the beam of your light to expand its possibilities.

Astera offers a variety of beam-modifying filters. When inserted into the AX5 they can widen the beam angle to 30° or turn it into an elliptical be...

Astera offers a variety of beam-modifying filters. When inserted into the AX9 they can widen the beam angle to 30° or turn it into an elliptical be...

3M Marine Adhesive Sealant 5200 Fast Cure White Here at Moss LED, we understand you are going to install our products into all kinds of weird loca...

RGBW IP67 Module 4 X RGBW 4100k LED ModulesCRI>90, DC12V, 1.5W, 20pcs/string, 160 degree lens.

Superior Industry-grade Connectors Install connectors on your own cable! Superior high current DC-rated connectors! Field - installable connectors...

Superior Industrial-grade Connectors Push-to-Lock and 1/4-Turn-Release make these both efficient and reliable 5-PIN Female Connector to bare end w...

Superior Industry-grade Connectors Push-to-Lock and 1/4-Turn-Release make these both efficient and reliable 5-PIN Male Connector to Bare end wires...

For use with the A23 Battery Holder. Two of these 12V batteries provide 24V - for use with all 24V FlexLED Products. 12V Battery provides optimal ...

For use with the AA Battery Holder. Eight of these 1.5V batteries provide 12V - for use with all 12V FlexLED Products. Volt: 1.5 Battery size: AA ...

Accessory Case for PixelBrick - Case and Foam insert only Sturdy plastic case to carry additional accessories to install and wire 8 PixelBricks.

ADAPTER DISK FOR AX3 Used to insert the AX3 into an AX5 dome (AX5-DDM or AX5-DDM-25) to create a stunning light ball. The Adapter Disk is made ou...

Color: Black This pack of adhesive/screw-down cable clamps are used to support for a variety of networking cables. They are easy to install and can...

Color: Black This pack of adhesive/screw-down cable clamps are used to support for a variety This pack of adhesive backed cable clips is used to or...

Color: Black or White This cable tie adhesive mount is used to direct and fasten cable-tied bundles to flat surfaces. Cable ties can be inserted fr...

Din-Rail brackets mount kit for the PixLite A4-S Mk3.

Mounting brackets for two PixLite T8-S units side by side in a 1RU 19" rack. High quality powder coated finish Seamless color match Compatible wit...

Mounting brackets for a single PixLite T8-S unit in a 1RU 19" rack. High quality powder coated finish Seamless color match Compatible with 19" 1U ...

Aluminum Channel MOSS-ALH-5858 Channel only.  No clips or end caps.  2 Meters

Aluminum Channel MOSS-ALQ-3015 Channel only.  No clips or end caps.  2.44 Meters

Aluminum Channel MOSS-ALQ-3015 Channel only.  No clips or end caps.  2.44 Meters

Aluminum Profile designed for mounting 8MM glass shelf. Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 2 Meter Lengths (Avai...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) Brackets (2), (1) Cov...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Brackets, (1) Cov...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Brackets, (1) Cov...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Brackets, (1) Cov...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (1) Cover, and (2) En...

A gorgeous hanging chandelier luminaire channel that accommodates any of our FlexLED strips up to 12MM in width. FlexLED strip is sold separately. ...