Cinema

Power Supply Charger for the Astera AX1 & NYX Bulb Power Station.

Set of 8 Extension Cables for Astera Titan Tube Power Box. Power/Data Combination Cable   Choose from 5 meter (16'). or 10 meter (32') or 15 meter ...

40° for Astera AX1 / Titan SGAT41-40- ASTERA EXCLUSIVE PRODUCTSNAPGRID® 40º for SNAPBAG® SBAT41 & SBAAT41 Single Tube AX1 and Titan    

40° for Astera Helios SGAT12W40 - ASTERA EXCLUSIVE PRODUCTfor ASTERA Helios Single Tube, incl Carry Bag    

Power supply charger for AX3 Lightdrop.

Please note we are not able to ship this product to the United States Comes with a power cord and all AX3 accessories (8x brackets, 8x 30° filter,...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 2 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Brackets, (1) Cover,...

Designed to be inlaid into a drywall surface, this channel provides a gorgeous seamless linear light with a 20MM (0.787") lens. At only 10MM in dep...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (1) Cover, and (2) End-P...

Non-stock item. Please contact us for a quote. Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in ...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Brackets, (1) Cov...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (1) Cover, and (2) End-P...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Hangers, (1) Cove...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) Brackets (2), (1) Cov...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (1) Cover, and (2) End-P...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Mounting Clips, (...

Beautifully Crafted Aluminum Channel for our FlexLED Strips Standard 1 Meter Lengths (Available in 0.5 - 3 Meter Lengths) (2) Brackets, (1) Cov...

An extremely simple and easy to use 6-channel DMX fader console for controlling 6 channels of DMX. A perfect companion for simple permanent install...

Kit of two brackets allowing for wall mounting of a single Stardust, Aurora or Luna. Attaches to the sides of either of the units using two of the ...

Allows for mounting of Stardust on a C-stand or similar. Mounting hole fits up to 1/2" bolts. Attaches to the Stardust using included M10 and 3/8" ...

Allows for rack mounting of a single Aurora or Luna. Attaches to the sides of either of the two units using four of the chassis screws.

Allows for rack mounting of Stardust using two patch cables to get all four antennas on the front. Attaches to the sides of Stardust using four of ...

Safety “R” Clip for Tube Holders (Pack of 20)Works with TubeHolder

NOW AVAILABLE   Kit of 8 LunaBulbs stored in a the PrepInlay and is made for you to make your own cases or flightcases after your own need....

Outdoor-rated permanent install-grade connectors Screw style locking connector Great for use indoors and outdoors. Molded connectors ensure years...

Neon FlexLED V4 LED lighting is the perfect replacement for traditional neon lighting. Not only is it easily customizable but it is far more durabl...

This antenna is slightly higher gain antenna for all the LumenRadio products with RP-TNC connector. It is intended for indoor use. It provides 5dBi...

OmniFlex 360 End Caps

Mounting Accessory end caps for the OmniFlex 360. All three end caps are a two-part cap to ensure the most reliable connection to the OmniFlex. Pri...

Mounting Accessories for the OmniFlex 360

OmniFlex 360 Cylinder Sleeve - 2 Meter Lengths Ø31 outside diameter

Please note we are not able to ship this product to the United States AsteraBox CRMX is the interface between lights and controller. It can be used...

Mounting brackets for two PixLite T8-S units side by side in a 1RU 19" rack. High quality powder coated finish Seamless color match Compatible wit...

Mounting brackets for a single PixLite T8-S unit in a 1RU 19" rack. High quality powder coated finish Seamless color match Compatible with 19" 1U ...

Din-Rail brackets mount kit for the PixLite A4-S Mk3.

Din-Rail brackets mount kit for the PixLite A4-S Mk3.

Meet the T8-S Mk3's other halfEnsure larger installations don't lose their impact with the PixLite® R2F-S. When paired with the T8-S Mk3 transmitte...

The FlexTron24 pixel controller is a 4-output device that is capable of powering 4 x 6 meters (19.68’) of OmniFlex 360 Pixel Product via a waterpro...

Designed for quickly connecting wire to wire, replaces a butt crimp. One-piece design makes installation easy and lowers the installed cost RUGGED•...

SemiCircle sleeve allows for easy mounting of the OmniFlex to a surface.

PRE-SALE PRICING IN EFFECT UNTIL AUG 31st Please note we are not able to ship this product to the United States Astera’s LeoFresnel is as ...

PRE-SALE PRICING IN EFFECT UNTIL AUG 31st Please note we are not able to ship this product to the United States Astera’s LeoFresnel is as ...

PRE-SALE PRICING IN EFFECT UNTIL AUG 31st Please note we are not able to ship this product to the United States Astera’s PlutoFresnel is a...

Power Station DC Split Cable for FP5 Power up to 8 NYX Bulbs