A new 'state-of-the-art' Pixel Control unit ready for today's large pixel control applications.
- Features 1 standard DMX512 universe output (acting as a single E1.31 to DMX bridge) via a dedicated XLR 5-pin connector, in addition to the 16 universes of pixel output
- Single power input rated at 30A
- 4 individual pixel outputs via 4 position terminal blocks with each output protected by 5A mini blade fuse in the event of an over-current situation. (can be changed up to 7.5A)
- Receives up to 16 universes of Artnet or sACN data with an additional 1 x universe of DMX 512 output E1.31 data via the on-board female XLR 5 connector.
- 4 layer PCB with high copper density
- Total output capacity of 2720 RGB pixels (max 680 per output) or 2048 RGBW pixels (max 512 per output)
Please ensure you are running the latest Firmware & Diode Manager to support the most recent pixel protocol additions. Firmware version 2.0.17 adds support fo GS8208 (12V RGB pixel) & version 2.0.19 adds support for UCS8904 (24V RGBW Pixel)
SPECIFICATIONS
| DC Input (V x A) | : | 5 - 24V DC (Output Voltage Matches Input Voltage) x 0.25A |
| Output Current (A) | : | 30A (4 X 7.5A) |
| Output Power (W) | : | 720W MAX - Input Matches Capacity of Power Supply |
| Agency Approvals | : | None |
| Size (inches) | : |
|
| Pixel Protocols | : |
TLS3001, SM16716, WS2801, LPD6803, WS2811, WS2812, WS2812B, MBI6020, TM1803, TM1804, MY9221, MY9231, APA102, SK6812, UCS1903, UCS1904, P9813, SK9822, DMX512P, MBI6023, SM16714, SK6813, TM1914, SM16703, SM16704, APA104, APA109, WS2814, WS2815, GS8208, MY9291, TM1814, UCS8903, UCS9812, WS2813, |
| Channel Count | : | 2,048 X 4 Outputs (8,192 Total) |
| Control Protocols | : | sACN or ARTnet |
| Protections: | : | short circuit, over voltage, overload, over current, over temp |
| DC Input Connector | : | Two Pole Terminal Block |
| Housing | : | Aluminum housing |
| Indicator | : | Front Red/Green LED - See Specification Sheet for Details |
| Output Connector Type | : | 4 X 4 Position Terminal Block |
| Output Connector Lock | : | None |
| Output Polarity | : | + / Clk / Data / Gnd |
| Weight (lb) | : | 0.72 |
| Mounting Options | : | Rack Ear Mounting - Surface Mounting |
| Cooling | : | Passive |
| : | ||
| Product Type | : | LED Pixel Control Product |
| MFR Product Family | : | PIXLART |
| Ambient Operating Temperature | : | -40C to 70C |
| Chassis Color | : | Black |
| Wiring Color Codes Output | : | *Refer to Specification Sheet |
Firmware Changelog
V.2.0.31
- Add support for MBI6023 pixel
V.2.0.30
- Fix stability issue with large volume of UCS8904 pixels
- Add support for SM16714 pixel
V2.0.29
V2.0.28
V2.0.27
V2.0.26
-Leave sACN groups before reboot on config change
-Implement sequence checking for sACN
-Visually identify units with a new UDP packet
-Fix ArtPollReply not reporting high universe numbers
-Add single pixel test mode
-Add support for APA104 and APA109
V2.0.25
- IMPORTANT: Fix ArtNet to DMX bug (which can also affect pixel outputs)
- Fix RGBW pixels could incorrectly subscribe to too many universes
- Fix incorrect value for "white" in test mode may show in Diode Manager
- DMX512 pixel driver supports RGBW pixels
V2.0.24
- Internal release. OEM changes.
V2.0.23
- Add WS2814 support
V2.0.21
- Improve Jitter
V2.0.20
- Add Art-Net to DMX support
- Fix DMX output test mode when live sACN data also being streamed to the port
V2.0.19
- Add UCS8904 pixel driver support
V2.0.18
- Color fade test runs smoother (incremental frame by frame steps)
V2.0.17
- Add WS2815 pixel driver support
- Add GS8208 pixel driver support
V2.0.16
- Add 4 channel gamma correction
- Add MY9291 pixel driver support
- Add white channel in set color test mode for RGBW pixels
V2.0.15
- Fixed incorrectly calculating the Art-Net broadcast address if 4th Subnet Mask byte not 0.
V2.0.14
- Add TM1814 support
V2.0.13
- Internal release. OEM changes.
V2.0.12
- Add UCS8903 support
V2.0.11
- Internal release. OEM changes.
V2.0.10
- Fix sACN/Art-Net timeout
Diode Manager Configuration Guide