LED Fixtures

Can be attached to AX2-50 without tools.

LED Bar with built-in battery for stage, events and film lightingAstera’s Wireless PixelBar is a linear wash fixture with built-in battery pack. Ea...

Gives your AX2 a black surface to camouflage it in black stages and other dark areas.

Insert filter into light to get a 30° beam.

Insert filter into light to get a 120° beam.

Can be attached to AX2-100 without tools.

LED Bar with built-in battery for stage, events and film lightingAstera’s Wireless PixelBar is a linear wash fixture with built-in battery pack. Ea...

Sturdy plastic case with wheels and handles to charge and carry 8 AX1 PixelTubes with its essential accessories. The included ChargingBox can charg...

EXTENSION CABLE FOR AX1 PIXELTUBEAdd 5m cable length to your AX1 power supply. Male to female cable.Technical SpecificationsOrder Code:AX1-EXCCable...

ChargingBox for AX1Power Supply to charge or install up to 10 AX1 PixelTubes. Unlike the Titan PowerBox it does not enable wired data connection. C...

Protective transportation case for ART7. Extra compartments for USB adapter and USB cable. 7-8” tablets can be placed on top to protect them as wel...

D-Tap Split Cable for FP5 Power up to 8 NYX Bulb from one V-mount battery with D-Tap socket. Designed for 14.4V batteries, 1.5m length cables.

This beam shaping device can be clipped onto the AX9 to cut off spill light and define the beam. It also helps to avoid glare when viewing it from...

Waterproof protection cover for the PixelBrick and Hydra charging port for PixelBrick & Hydra Charging Port (Pack of 20)

The Cross-Focus Quattro is a cutting edge high output, colour temperature adjustable LED light designed for use on film & television sets or an...

New for 2018! A new range of LED fixtures designed by West Coast Illumination & Moss LED. 5 different sizes and 5 different LED Engines. Bi-Co...

New for 2018! A new range of LED fixtures designed by West Coast Illumination & Moss LED. 5 different sizes and 5 different LED Engines. Bi-Co...

for Astera Helios 2021 New Version - SNAPBAG® 3 Tubes for Astera Helios SBAAT22 - ASTERA EXCLUSIVE PRODUCT For 3 ASTERA Helios Tubes, including Air...

For ASTERA Helios Tubes. including SNAPGRID and Carry Bag.  Fits on SNAPBAG® Astera 2' x 1' incl. Carry Bag 40° Degree Beam Angle Installed Size ...

It's the same as Titan, only BIGGER! Please note we are not able to ship this product to the United States After the enormous success of the ...

It's the same as Titan, only BIGGER! Please note we are not able to ship this product to the United States After the enormous success of the ...

Charge or install 8 PixelBricks.  Also allows wired data transfer from DMX, Artnet and sACN sources.  Comes with PowerCon AC cable and 8 short DC ...

Please note we are not able to ship this product to the United States Astera Accessory kit for PixelBrick set of 8.  Kit includes: Top Layer: 10 -...

Modify the beam of your light to expand its possibilities.

Modify the beam of your light to expand its possibilities.

Create an evenly illuminated pixel dome or remove the 120° filter for a wide-angle soft light.

Slide into the PixelBrick's side to connect mounting tools through 1/4"-20 and M5 threads. Set of 8

Connect 2 PixelBricks to each other's side. Set of 8

Comes with the PixelBrick and acts as a stand and hanging mount with airline track and 1/4” thread.

Connect 2 PixelBricks, angle them to spread their beam and to create shapes.

Connect 2 PixelBricks, tilt them to spread their beam and to create shapes.

Accessory Case for PixelBrick - Case and Foam insert only Sturdy plastic case to carry additional accessories to install and wire 8 PixelBricks.

Sturdy charging and transportation case with 2 wheels and 3 handles to carry 8 PixelBricks.  The included power supply can charge 8 units from one ...

Titan LED Engine, 15W, CRMX + Wired DMX Say hello to Astera's next-generation multi-purpose light. In addition to being a battery-powered uplight a...

Foldable Stand for AX1, Titan and Helios tubes. Sits very close to the floor for low angle shooting. The three legs fold into each other for...

For Suspending AX1 PixelTube*, Helios Tube, Titan Tube, Hyperion Tube Also for securing tubes via safety cable *only newer AX1 PixelTubes that ...

Charging plate for 4 X AX5 TriplePars.

AX3 LightDrop Wall Washer Filter

AX3 LightDrop 120° Flood Filter

AX3 LightDrop 30° Flood Filter

Description: Charging case allows you to carry eight (8) Helios Tubes.  Power Box is included

For 3 ASTERA Helios Tubes.  Fits on SNAPBAG® Astera 2' x 2' incl. Carry Bag.   40° Degree Beam Angle Installed Size 60 x 54 x 11 cm24 x 21 x 4 in

NYX Empty Case.  Designed to transport the following: 8 NYX Bulbs 1 PowerStation 8 CupBouncers1 1 48VDC PSU

Includes single stud fitting to connect the PowerStation's Airline Track.

The TrackPin Baby Pin with Single-Stud Fitting from Astera works with airline track (L-track) to create strong and secure tie-down anchor points fo...

The E27 Socket for FP5 LED Bulbs with Single-Stud Fitting from Astera provides a non-powered E27 socket for NYX LED bulbs with a single-stud fittin...

Key Features Hold 4 Wingplates Parallel to Cross Plate 5/8" Baby Pin AX1-WP Wingplates Purchased Separately AX1-H Metal Holders Purchased Se...

Key Features Mounting to Truss & Other Structures Compatible with FP1, FP2, FP3 Tubes Also Works with Spax Screws This Metal Holder for Mo...