WE WILL BE CLOSED FOR THE HOLIDAYS 12/25 - 1/1 *** FREE SHIPPING IN CANADA OVER $199 ***
WE WILL BE CLOSED FOR THE HOLIDAYS 12/25 - 1/1 *** FREE SHIPPING IN CANADA OVER $199 ***
Contact Us About Us Where to Buy Videos News
Skip to content
Pixel FlexLED 5V RGBW Mid Frequency

Pixel FlexLED 5V RGBW Mid Frequency

SKU I5VRGBW65360SK6812-PCB-B
by MossLED
Save 29%
$183.99
$131.42
Pixel Density
Colour
Connector Type
Availability: Translation missing: en.general.icons.icon_check_circle icon 43 in stock, ready to be shipped

72 LED/Meter PixelFlex LED Tape RGBW in 5V DC

Mid frequency and high quality SK-6812 chips provide individual control to each pixel for dazzling effects and endless possibilities. Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
Suitable for on-camera use and flicker-free up to 60 fps at some camera settings. 1.2 kHz operating frequency.

Pixel Product Installation Notes:

  • The PWM frequency (dimming frequency) is baked into the pixel and cannot be changed.  You must ensure you choose the right pixel strip for your application.  If you are unsure of what camera settings are going to be in use, it is best to go with high frequency pixel tape (8khz or higher / GS8208 or APA102)
  • Avoid voltage drop by positioning a power supply close to the LED strip and/or powering the LED strip from multiple locations (or via multiple power supplies)
  • The power supply that is providing power to the controller (PixlArt416) does not need to be the same power supply that is powering the LED strip.
  • During testing ensure that the pixel strip is receiving the required voltage by doing a volt meter test at the contact pads of the LED strip.


Soldering Guidelines:

Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.

Other Notes:

  • Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick.
  • Waterproof strips require mounting via silicone glue or mechanical hardware
  • Controller, power supply and extension cables are sold separately based on your project
  • Quantity discounts available
  • Custom colour temperatures, pixel densities, and PCB colour are available
  • Please contact us for more information

Pricing is for 5 meters (16.4')

SPECIFICATIONS - INDOOR PRODUCT

Product Type : 72 LED/meter 72 LED/meter
Product Code : I5VRGBW65360SK6812-PCB-B I5VRGBW30360SK6812-PCB-B
CRI : 80+ 80+
Kelvin : 6500k +/- 300k 3000k +/- 200k
PCB Color : Black Black
Current, Rating : 3 A / meter 3 A / meter
Voltage : 3.5 ~ 5.5 VDC 3.5 ~ 5.5 VDC
Wattage : 15 W / meter 15 W / meter
CC / CV : Constant Voltage Constant Voltage
IP Rating : IP43 IP43
Lumens @ Full : 216 260
Lumen / Watt : 12 12
Lifetime* : 30,000 hours 30,000 hours
Cutting Length : Individual LED - 1.39 CM Individual LED - 1.39 CM
LED Quantity : 72 LED / meter 72 LED / meter
Number of Contacts : 3 3
LED Type : SK6812
 SK6812
Copper Quantity : 3 Oz. 3 Oz.
Temperature, Operating, Maximum : 70 C 70 C
Temperature, Operating, Minimum : -40 C -40 C
Agency Ratings : UL - E489028, CE, RoHS UL - E489028, CE, RoHS
PCB Width : 12 MM 12 MM
Maximum Recommended Length : 5 meters (must be powered at both ends) 5 meters (must be powered at both ends)
Viewing Angle : 120 degree 120 degree
Adhesion : 3M 300LSE 3M 300LSE
Operating Frequency : 1.2 kHz 1.2 kHz
Wavelength A : 620 ~ 630nm 620 ~ 630nm
Wavelength B : 515 ~ 530nm 515 ~ 530nm
Wavelength C : 460 ~ 470nm 460 ~ 470nm
Wavelength D : N/A N/A
Data Transmission Speed : 800 kHz 800 kHz
Refresh Rate : 30 FPS 30 FPS

DOWNLOADS

  1. Specification Sheet

  2. UL Certificate of Compliance

*nominal lifetime - dependent on installation location