240 LED/meter, high brightness and high efficiency 1210 chips.Standard 3M 200MP double-sided adhesive that makes installation as easy a peel n' stick. Installing onto a clean, dry surface in room temperature ensures the product will stay where you install it for many years to come.
The 240 LED/meter at 5 meters falls into a class 2 specification drawing only 19.2 watts / meter (96 watts when powered from both ends) (85.4 watts when powered from one end)
This cost friendly RGBA LED is designed to be used for temporary installs such as trade shows or limited run productions. It is not to be used for permanent high-use installations. Warranty on all Temporary Install Grade LED is for 2,000 hours of use.
Pricing is for 5 meter length
Controller, power supply and extension cables sold separately
Soldering Guidelines:
Soldering iron should be between 360°C and 372°C. Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.
SPECIFICATIONS - INDOOR PRODUCT
Product Type | : | 240 RGBA 24V (Individual Diodes) |
Product Code | : | I24VRGBA12001210 |
CRI | : | N/A |
Kelvin | : | RGBA |
PCB Color | : | White |
Current, Rating | : | 0.79 A / meter |
Voltage | : | 24 VDC |
Wattage | : | 19.2 W / meter |
CC / CV | : | Constant Voltage |
IP Rating | : | IP43 |
Lumens @ Full | : | 1300 lm / meter |
Lumen / Watt | : | 67.7 |
Lifetime* | : | 2,000 hours |
Cutting Length | : | 10 CM |
LED Quantity | : | 240 LED / meter |
Number of Contacts | : | 5 |
LED Type | : | 1210 |
Copper Quantity | : | 3 Oz. |
Temperature, Operating, Maximum | : | 70 C |
Temperature, Operating, Minimum | : | -40 C |
Agency Ratings | : | UL - E489028, CE, RoHS |
PCB Width | : | 14MM |
Maximum Recommended Length | : | 5 meters |
Viewing Angle | : | 120 |
Adhesion | : | 200MP 3M |